Skip to product information
Reduces mineral deposits in boiler side of water-to-water heat exchangers. See Owner's Manual or 4200 Parts Book for amounts to use for each model. NOTE: Sludge Conditioner should be used if the water quality is known to contain higher concentrations of minerals or solids. It is best to use softened water instead. If a furnace has been subjected to low Corrosion Inhibitor levels and corrosion is evident in the water jacket, Sludge Conditioner can be used to help clean some of the corrosion from inside the water jacket before flushing and refilling.
166 Sludge Conditioner, 1 GAL.
$54.95 USD
Details
Overall Efficiency (LHV) - 96.2%*
Overall Efficiency (HHV) - 89.2%*
Manufacturer's Rated Heat Output Capacity** - 190,000 Btu/hr
Door - 15.5"W x 13.5"H
Weight - 1,310 lbs
Supply/Return Ports - 1 set of 1-1/4" supply and return ports, 1 set of 3/4" supply and return ports
Water Capacity - 90 gal.
Hopper Capacity - 11 Bushel (600 lbs)
Included with outdoor furnace - Water Test Kit, Cleaning Rod, Flue Brush Kit, Ground Rod Kit, Ash Scoop, Rain Cap and two 4-foot chimney sections
PICKUP ONLY
Outdoor wood boilers are PICK UP ONLY - Cannot be delivered or shipped.
Shop The Full Collection
